Table of Contents
Advertisement
Connections and features:
Control Box:
1. Fuse 4A
4. Sync Button
2. Power Switch
5. Status LNB
3. Power LED
6. USB update port
Product contents:
> Antenna Unit / Control Box
> 65/85cm Antenna (separate carton)
> Accessory Pack
> LNB Park Plate
> Control Box bracket
> No.10 Screws
> No.6 Screws
> Cable Clips
Required tools and equipment (not supplied):
> 32mm hole saw
> 2.5mm twist drill
> Power Drill
> No.2 Phillips screwdriver
> Weather Resistant Elastic Adhesive* and Applicator gun
> Surface Cleaner
> 10mm spanner
> Hexagonal socket key 4mm
> Deburrer/Round File/Emery paper
> Conduit (recommend method for securing cables)
Visit: www.maxview.co.uk - Search 'Target' for potential software updates
7. Receiver
8. LNB in
9. Antenna Connectors
Reference page 13 for
interface information
1
2
7
8
x 1
x 2
> M6 Button Head Screw x 4
x 6
> M6 Locking Nut
x 4
> 6mm Plastic Washer
x 6
> Cable Entry Plate
x 12 for quad
10. Installation Button
11. Power Input
3
9
x 4
x 4
x1
> Automotive 2.5mm² cable
> Electrical connector block
> Flylead (for connection to satellite receiver)
*Maxview recommends the following adhesives:
> Sikaflex®-512 Caravan
> Geocel® Geobond HM
> Sikaflex®-252
5
6
4
10
11
Page 5
Advertisement
Table of Contents
