Preparing Vehicle For High Temperatures Or Slow Riding - Husqvarna TX 300i 2021 Owner's Manual

7 PREPARING FOR USE
7.8
26
600868-01

Preparing vehicle for high temperatures or slow riding

M01129-01
600868-01
–
Mount the steel sprocket.
–
Clean motorcycle. ( p. 123)
–
Straighten the bent radiator fins carefully.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is
operated frequently due to an excessively high sec-
ondary ratio.
–
Clean the chain.
Chain cleaner ( p. 140)
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
–
Check the coolant level. (
1.8 bar (26 psi)
p. 104)