Simultaneous Ringing - Mitel MiVoice 6920 User Manual

Hide thumbs Also See for MiVoice 6920:

Table of Contents

3. Navigate to the Voice Services > MiVoice Connect and press the select button or press the

Select softkey.

4. In the Config. Server field, enter the MiVoice Connect Server IP address.

Or, edit the existing MiVoice Connect Configuration Server address.

5. Press the Save softkey.

Note: Mitel does not recommend changing the server configuration address after the

phone is successfully registered.

Simultaneous Ringing

The simultaneous ringing feature allows users to configure up to two additional phones to ring in

addition to their assigned phone. The Mitel administrator needs to configure the simultaneous ringing

feature in the MiVoice Connect Director (Connect portal). When this feature configured for a user,

the Additional Phone option (in the Settings) becomes available for the user.

A user can follow these steps to activate the simultaneous ringing feature:

1. Press

2. Enter your voicemail password, and press the Enter softkey.

3. Navigate to the Additional Phone option and press the select button or press the Select softkey.

4. Select the Additional Phone check box and press the Save softkey to activate the simultaneous

ringing feature.

To enable or disable additional ringing:

1. While your phone is ringing, press the AddOn softkey.

The designated extension starts ringing.

2. Press the AddOff softkey to stop ringing on the additional phone. The call returns to the original

extension.

Simultaneous Ringing

Table of Contents