Page 1
ROPE WALK Installation Instructions REF: CH119 - ROPE WALK pg 1 of 8...
Page 2
Parts required (FM80 ‘BRASS SCREW’) (PRE-ASSEMBLED TOP SECTION) (Chain x 2150mm) (EYEBOLT X 160) (PRE-ASSEMBLED ROPE) (QUICKLINK ) (PRE-ASSEMBLED CENTER SECTION) (end caps) (PRE-ASSEMBLED LEFT/RIGHT SECTION) (M12 NYLOC) pg 2 of 8 REF: CH119 - ROPE WALK...
Page 3
Foundation details GROUND LEVEL SOIL SOIL TIMBER SUPPORT POST TIMBER SUPPORT POST CONCRETE CONCRETE pg 3 of 8 REF: CH119 - ROPE WALK...
Page 4
Surfacing details = MINIMUM SPACE = SURFACING AREA pg 4 of 8 REF: CH119 - ROPE WALK...
Page 5
Assembly instructions Install PRE-ASSEMBLED LEFT/RIGHT/CENTER sections ENSURE: The holes are facing the correct direction Attach the Eyebolt to the Timber (RW4) Using NYLOCKS / END CAPS NOTES: LEFT/RIGHT SIDES pg 5 of 8 REF: CH119 - ROPE WALK...
Page 6
Assembly instructions Attach the Eyebolt to the Timber (RW2) Using NYLOCKS / END CAPS NOTES: CENTER SIDE Attach the ROPES to the TOP SECTION Using FM80 BRASS CREWS NOTES: BOTH SIDES pg 6 of 8 REF: CH119 - ROPE WALK...
Page 7
Assembly instructions Attach TOP SECTIONS Using FM80 BRASS CREWS NOTES: BOTH SIDES Attach the CHAINS to the EYEBOLTS using a QUICKLINK Use LOCK TIGHT to ensure the quick link remains CLOSED pg 7 of 8 REF: CH119 - ROPE WALK...
Need help?
Do you have a question about the CH119 and is the answer not in the manual?
Questions and answers