Starting The Engine; Recoil Start; Electric Start - Lifan KP4500iE Owner's Manual

7.0 Starting the Engine

7.1 Recoil Start

1. Remove all loads from the output end
2. Rotate the 3 in 1 control knob to the "Choke" position
3. Turn the AC protector/Breaker to "Off"
4. Pull the recoil starter slowly until compression is felt, then
pull it briskly.
5. After starting the engine, set the 3 in 1 Control Knob to
the "Run" position
6. To use electrical equipment, AC circuit breaker protector
should be placed in "on" position
When starting an already warm engine, it may not always
necessary to set the 3 in 1 control knob to the "choke"
position.

7.2 Electric Start

Before starting the generator,
connect the positive wire to the
positive terminal of the battery.
Secure it with the correct tool and
cover the connector with the
insulation protective sleeve
25