Starting The Generator - Lifan KP2300i-2 Owner's Manual

5.1 Starting the Generator from cold
1. Turn the energy saving switch to "OFF".
2. Turn the fuel tank cap ventilation lever to "ON".
3. Rotate three-in-one combination switch to the "CHOKE" position to:
A) turn the fuel on
B) turn the ignition system on
C) close the choke to assist the cold engine to start
NOTICE: When the engine is hot, it may not always be necessary to set the
"CHOKE" position when starting.
4. Gently pull the hand starter until compression is felt, then pull it hard.
NOTICE：When pulling the hand starter, grasp the carrying handle to prevent the
generator from tipping over. Once the engine is running smoothly after startup, turn
the three-in-one combination switch to "ON".
18