7.3 Remote Start
1. Confirm whether the load is within the rated power range
of the generator
2. Rotate the start switch to place the start button in the "run"
position
a. Fuel System on
b. Ignition system on
c. Remote control power on
3. Press the "START" button on the remote-control fob, the
generator will start automatically (in order to avoid mis-
operation, there is a delay function, only press the remote-
control button for about 1-2 seconds when operating the
remote control)
4. Once the generator is running, set the AC circuit breaker
to the "ON" position before the electrical load can be used
27