Turning Scan On While Disregarding The Squelch Code (Conventional Channels Only); Transmitting While The Scan Is On; Transmitting Using Radio Programmed For Talkback Scan; Transmitting Using Radio Programmed For Non-Talkback Scan - Motorola APX 4500Li User Manual

Turning Scan On While Disregarding
the Squelch Code (Conventional
Channels Only)
You can still receive fleetwide, system-wide, dynamic
regrouping, incoming telephone interconnect, and Private
Conversation/Call Alert calls while scanning for activity.
You may respond to these types of calls as you would
normally on the selected channel. However, when scanning
different channels while in talkgroup scan, incoming Private
Conversation/Call Alert calls may be missed.
or to Mon and press the Menu Select button
directly below Mon.
The brief Monitor on display indicates that the radio is
disregarding the squelch code.

Transmitting While the Scan is On

This feature allows the user to transmit using radio
programmed for talkback scan and non-talkback scan.
Transmitting Using Radio Programmed for
Talkback Scan
Press the PTT button to transmit on the channel
indicated by the display.
The radio does not begin scanning again for a
predetermined hang time after you release the PTT
button, allowing the other party to respond. If the
other party responds within the hang time, scanning
does not resume until the full hang time expires after
they have finished speaking, allowing the
conversation to be completed.
To transmit on the selected channel if another
channel is active, first turn scan off by pressing the
Menu Select button below Scan momentarily.
Transmitting Using Radio Programmed for
Non-Talkback Scan
Press the PTT button at any time to transmit on the
selected channel or fixed channel.
To make a Call Alert page, or Private Conversation
call while scanning, press either the Menu Select
English
95