Emergency Operation - Motorola APX 4500Li User Manual

The receiving radio must also be pre-programmed to
decode the tone to broadcast.
1
or to QCII, and press the Menu Select button
directly below QCII.
2 or to select the tone to broadcast.
3 Press the PTT to broadcast the selected tone, or
press and hold the PTT to broadcast the selected
tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You
can begin your call after the tone ends.
4 Release PTT to listen.

Emergency Operation

The Emergency feature is used to indicate a critical
situation. If the Orange button is preprogrammed to send
an emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
• Special Considerations for Emergencies
Check with your dealer or system administrator for more
information on the programming of this feature.
One channel supports only one Emergency mode. The
radio responds differently when pressing the
preprogrammed Emergency button in each channel.Only
one of the Emergency modes can be assigned to the
preprogrammed Emergency button or the Emergency
footswitch.
The radio operates in the normal dispatch manner while in
Emergency Call, except if enabled, it returns to one of the
following:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an
emergency call on the current channel.
Non-Tactical/Revert for Conventional System
The radio reverts to the preprogrammed emergency
channel to send an alarm and/or make an emergency
call.
English
101