Table of Contents
Advertisement
English
NOTICE:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You will hear the
Menu Inactive Exit Tone upon feature exit.
Making a Talkgroup Call
To make a call to a group of users, your radio must be
configured as part of that talkgroup.
1 Perform one of the following actions:
•
or to Tgrp and press the Menu Select button
directly below Tgrp. The display shows the last-
selected talkgroup. Press the Menu Select
button directly below Sel .
•
Use the MFK to select the channel with the
desired talkgroup.
2 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the
system the radio is configured.
68
•
For ASTRO Conventional system, the LED lights
up solid red. The display shows the talkgroup
alias or ID.
•
For Trunking system, the LED lights up solid red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
Making a Private Call (Trunking Only)
Your radio must be preprogrammed for you to use this
feature.
This feature allows you to send an individual Call Alert or
page if there is no answer from the target radio. See
Sending a Call Alert Page on page 98
information.
1 Perform one of the following actions:
•
To access this feature using a preprogrammed
button, press the preprogrammed Quick Access
(One-Touch) Private Call button to dial the
preprogrammed ID (number) and initiate the
Private Call. Proceed to
for more
step
4.
Hide quick links:
Advertisement
Table of Contents
