Meridian 4055 SEED EXPRESS Operator's Manual page 4

DEALER INSPECTION REPORT
Unit's Model Number ______________________
£
Review safety and operating instructions with owner
£
Verify receipt of all options ordered
£
Verify that tow vehicle is large enough to safely tow seed tender
£
Check engine fuel level. Add as needed
£
Check engine oil level. Add as needed
£
Start engine and make sure it operates properly
£
Check oil level in hydraulic tank. Add as needed
£
Check air pressure in tires. Add as needed
£
Wheel nuts/bolts are tightened to proper torque on all wheels
£
Hitch-to-tongue and hitch-to-frame bolts are tightened to proper torque
£
Conveyor tube rotates 180 degrees and locks into towing position
£
Weighing system is working properly
£
Remote control system is working properly
£
All guards/shields are installed correctly
£
All safety decals are installed and legible
£
Wiring harness plug is in working condition and fit into tow vehicle's receptacle
£
Reflectors, plate light, signal lights, and brake lights must be clean and working properly
£
Tender's battery is fully charged and in good working order
£
Break-away brake system battery is fully charged and in good working order
£
Break-away brake cable and pin is supplied with trailer
£
Electric brakes are in working condition
£
Inspect customer's hitch for 2-5/16" ball or fifth wheel
£
Safety chains are properly attached and are in good working condition
£
Owner is instructed to check wheel bolt/nut torque at 5, 10, 25, and 50 miles; then check annually
MERIDIAN MANUFACTURING INC.
2902 EXPANSION BLVD. STORM LAKE, IA 50588
T: (800) 437-2334 P: (712) 732-1780 F: (712) 732-1028
www.meridianmfg.com iowa_warranty@meridianmfg.com
Unit's Serial Number _______________________
®