Table of Contents
Advertisement
Operator's Manual: 4055 Seed Express
7. Attach the safety chain securely to the tow
vehicle to prevent unexpected separation.
- Cross the chains when attaching.
8. Connect the wiring harness for the lights
and brakes.
9. Connect the break-away system cable to
the tow vehicle.
- Plug the key on the end of the cable into
the receiving unit.
10. Route all the cables in a manner that will
prevent snagging.
- Be sure to provide slack for turning.
3.7.2 Gooseneck Hitch Trailer:
CRUSHING HAZARD
The adjustable height tube in Figure 25 is
very heavy and can cause severe injury if it
falls free. Once the lock bolt is loosened and
the hitch pin is removed, the tube is free to
fall to the ground if not properly supported.
1. Adjust the trailer jack to set the trailer in a
level position.
2. Loosen lock bolts (a) on the adjustable
height tube. Remove the keeper pin (b) and
remove the tube lock pin (c).
3. Adjust the tube height for the tow vehicle
which would keep the trailer in a level
position.
4. Reinstall the pin and keeper.
- Tighten the tube lock bolt.
11.2022
Bulk Seed Tender
™
®
a
b
c
Fig 22 - Break-Away cable
Fig 23 - Gooseneck hitch
Fig 24 - Gooseneck trailer jack
Fig 25 - Gooseneck hitch components
®
3-17
Advertisement
Table of Contents
