Attaching To Tow Vehicle; Bumper Hitch Trailer - Meridian 4055 SEED EXPRESS Operator's Manual

Bulk seed tender
Table of Contents

Advertisement

Operator's Manual: 4055 Seed Express
UPENDING HAZARD
Do not stand over hitch when unhooking
the trailer from the tow vehicle.
• Load compartment 1 (closest to hitch)
first to keep weight on the hitch.
• Unload compartment 2 first
to keep weight on the hitch.
CRUSHING HAZARD
Ensure that all bystanders, especially
small children, are clear of work area.
Ensure there is enough room
and clearance to safely
back up to the machine.
IMPORTANT:
Conveyor tube must be locked in
transport position at all times while towing.
1. Complete the Pre-Operation Checklist.

3.7.1 Bumper Hitch Trailer:

2. Use the trailer jack to lift the hitch above the
height of the receiver on the tow vehicle.
3. Slowly back the tow vehicle until the hitch
and ball are aligned.
4. Lower the hitch onto the ball.
5. Raise the jack and place it in its stowed
position.
6. Release the latch to lock the hitch around
the ball
- Install retainer clip to secure connection.
3-16
Bulk Seed Tender

3.7 ATTACHING TO TOW VEHICLE

®
Compartment 1
(closest to hitch)
Fig 19 - Compartment position identification
Fig 20 - Conveyor tube transport lock
Fig 21 - Trailer hitch with safety chains
®
Compartment 2
(rear of tender)
11.2022

Advertisement

Table of Contents
loading

Table of Contents