Supero FatTwin F617R3-FT User Manual page 108

FatTwin F617R3-FT FatTwin
Isoc
Select Enabled to enable Isochronous support to meet QoS (Quality of
Service) requirements. This feature is especially important for virtualization
technology. The options are Enabled and Disabled.
QPI (Quick Path Interconnect) Link Speed Mode
Use this feature to select data transfer speed for QPI Link connections. The
options are Fast and Slow.
QPI Link Frequency Select
Use this feature to select the desired QPI frequency. The options are Auto,
6.4 GT/s, 7.2 GT/s, and 8.0 GT/s.
 DIMM Confi guration
This section displays the following DIMM information.
Current Memory Mode
This item displays the current memory mode.
Current Memory Speed
This item displays the current memory speed.
Mirroring
This item displays if memory mirroring is supported by the motherboard.
Memory mirroring creates a duplicate copy of the data stored in the memory
to enhance data security.
Sparing
This item displays if memory sparing is supported by the motherboard.
Memory sparing enhances system performance.
DIMM Information
The status of the memory modules is displayed as detected by the BIOS.
Memory Mode
7-12