Supero FatTwin F617R3-FT User Manual page 66

FatTwin F617R3-FT USER'S MANUAL
Notes:
1. For the latest CPU/Memory updates, please refer to our website at
www.supermicro.com/products/motherboard/
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
Jumper Description
JBT1 Clear CMOS
JFLED2 BMC-Failure LED Enable
2 2
JI C1/JI C2 SMB to PCI-E Slots
JPB1 BMC Enabled
JPG1 VGA Enabled
JPL1/JPL2 LAN1/LAN2 Enable
JWD1 Watch Dog Timer Enable
LED Description
DP1 BMC Activity LED
LED1 Rear UID LED
LED2 Front UID LED
LED5 Onboard Power LED
X9DRFF Quick Reference
State
Green: Blinking
Blue: On
Blue: On
On
5-14
http://
for details.
Default Setting
See Section 5-9
Closed (Disabled)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Status
BMC Active
Unit Identifi ed
Unit Identifi ed
Onboard Power On