Table of Contents
Advertisement
Inspection & Maintenance
To keep your Shoprider scooter in good working order, some home maintenance
can been done along with regular servicing by your Shoprider dealer.
CAUTION: Only qualified technical people should carry out service work.
SEAT UPHOLSTERY: A damp cloth and a mild soap will keep your seat and
backrest looking good. Do not use abrasive cleaners, as this will damage the
coating. Chemical cleaners can damage upholstery.
Ultra-violet light can also reduce the life of the upholstery coating material. This is
a normal ageing process, and cannot be guaranteed (see exclusion in the
Warranty terms section).
BODYWORK: The bodywork on your scooter can be lightly washed with mild
soap and water. Auto polish can be used to keep the paint in pristine condition.
Do not use abrasive cleaners or strong detergents, as this will fade the color.
CAUTION: Do not hose down your scooter. Water could be forced into the
electronics and cause permanent damage.
DO NOT store your scooter in damp conditions. This may affect the electronics if
left for very long periods of time.
ELECTRONICS: Servicing of the drive electronics and charger should only be
carried out by your local Shoprider service dealer. These units are sealed and
should not be opened. BROKEN SEALS WILL VOID YOUR WARRANTY.
You will find that the distance that your scooter can travel will gradually increase
over the first few weeks of use, as the batteries reach their optimum efficiency
after approximately 12 cycles of discharge and recharge.
WARNING
1. Do not smoke or use an open flame while your batteries are being
charged.
2. Do no use an extension cord unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and electric shock.
17
Advertisement
Table of Contents
