Trouble Shooting - Shoprider eclipse 778EL Instruction Manual

If your scooter will not start:
1. Make sure that the key switch is turned on? If it is, the battery condition gauge
will be operating.
If the battery condition gauge fails to operate when the key switch is in the
"on" position, check the following:
1. Make sure the battery charger is not plugged into the wall outlet. This will
prevent drive.
If your scooter does not slow down, or the variable speed control does not
work:
1. Turn off the power "on" key switch.
2. Inform your authorized Shoprider dealer.
CAUTION: If you find for any reason that your scooter doesn't reduce speed
when you let go of the forward-reverse throttle, switch your scooter "off" with the
on/off key. The parking brake will activate immediately and stop your scooter. Be
aware that the scooter will stop very suddenly, so brace yourself with the
handlebars; sit back on your seat.
If you feel for any reason that your scooter is not driving correctly, or is making
an unusual noise, stop using the scooter. Be SAFE, Contact your Shoprider
dealer, who will be able to advise you.
GENERAL DESCRIPTION: The scooter controller system incorporates a
sophisticated microprocessor design. It is located under the cover of your
scooter. The scooter controller continually monitors the scooter system, and
ensures safe and reliable operation.
SAFETY CONDITIONS MONITORED INCLUDE
• Speed control system integrity
• Internal voltages and circuits
• Motor voltages and circuits
• Safety isolate relay
• Battery voltage
To ensure safety, the controller will not operate if the speed thumb lever (throttle)
is not in the neutral position.

Trouble Shooting

20