Table of Contents
Advertisement
3. Do not use the charger if it has received a sharp blow, been dropped or
otherwise misused in any way. Take it to a qualified technician.
4. Do not dismantle the charger. This will void the warranty.
5. Do not switch off, unplug or interrupt the recharge cycle until the charging
cycle has completed. Make sure that the charger indicator light is green
before you unplug your charger.
FAILURE TO OBSERVE THIS INSTRUCTION CAN RESULT IN
DO NOT operate your scooter in extreme weather conditions, i.e. very heavy rain
or snow.
DO NOT drive through deep water. This could damage the main electronic
controller.
MOTOR BRAKES – If the motor brakes are functioning correctly, you will not be
able to push your machine when it is switched off or switched on with the speed
control throttle in the neutral position.
If your scooter can be pushed as described above, the motor brake(s) may be
faulty. Please do not use the scooter and contact your Shoprider dealer
immediately.
SAFETY NOTE: For your own safety, we recommend that you check the function
of your scooter brakes prior to a journey.
DRIVING BRAKE – When you drive your scooter and let go of the speed control
throttle, your scooter should reduce speed very quickly. If you notice a change in
the normal driving/slowing condition and your scooter does not slow down
quickly, please do not use your scooter and contact your Shoprider dealer.
TIRES – Your scooter comes with air filled tires. Check air pressure condition of
your tires regularly. Look for signs of wear, cuts and foreign objects lodged in the
tread. See next page for tire pressure information.
CAUTION: Your scooter has split wheel rims. DO NOT remove wheel bolts.
BATTERIES – Keep your batteries well charged (see Battery Charging section).
Keep batteries clean and in a dry frost-proof place. Keep battery terminals tight.
OVERCHARGING THE BATTERIES.
18
Advertisement
Table of Contents
