Table of Contents
Advertisement
11.9
Replacing the cable gland set
Procedure
①
②
Figure 11-5
1. Isolate the device from power and secure it against being switched on again.
2. Wait for about 10 minutes (energy discharge of the capacitors).
3. Loosen the six screws and open the door.
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB
Shielding plate
Screws for shield plate (3 pieces)
Replacing the cable gland set
Maintenance and servicing
11.9 Replacing the cable gland set
③
Screw for fastening the cable gland plate to
the side panel of the housing
④
Complete cable gland set
153
Advertisement
Table of Contents
