Setting Procedure - Epson TM-U220-i Technical Reference Manual

Setting Procedure

If you need to change settings, follow the steps below to make your changes:
 Turn off the power while removing the DIP switch cover to prevent an electric short, which
can damage the printer.
 Be sure to put back the DIP switch cover before using the printer.
1
Make sure the power supply is disconnected.
2
Use a crosshead screwdriver to remove the screw holding the DIP switch
cover.
3
Use a tool, such as tweezers, to set the DIP switches to your liking.
4
Attach the DIP switch cover to the base of the printer.
Chapter 2 Setup
2
61