Msw 8-5:
When Off is selected, a bit of the "roll paper end sensor" in each status that is transmitted
from the printer is changed every time the roll paper cover is open or closed. When On is
selected, a bit of the "roll paper cover open / close" in each status that is transmitted from
the printer is changed every time the roll paper cover is open or closed.
Msw 8-8:
When Off is selected, a bit of the "automatic recoverable error" in each status that is
transmitted from the printer is changed every time the roll paper cover is open. When On is
selected, a bit of the "mechanical error" in each status that is transmitted from the printer is
changed every time the roll paper cover is open.
The setting of Msw 8-5 and 8-8 can be set by "Memory switch setup mode". (U
Switch Setup Mode" on page
Customize value
Function
Roll paper width
See " Changing the Paper Width" also to adjust roll paper width (U
Width" on page
64).
57.5 mm
76 mm (default value)
43).
Chapter 2
Selectable value
69.5 mm
--
"Changing the Paper
Setup
"Memory
2
63