Kalamazoo K54DB Use And Care Manual page 67

5. Install the new bulb into the socket, taking care to
use clean gloves or cloth to handle the new bulb.
6. Seat the bulb fully into the socket using firm
pressure.
7. If necessary, bend the clip back into the original
profile of right-angle bends. Position the clip onto
the light lens.
RETAINER CLIP PROFILE
8. Place the light lens onto the light housing by
first securing the non-clip end into the fixed lens
retainer and then firmly pressing the lens and
retainer clip into the housing. The lens should
click back into place and be fully retained.
+1.800.868.1699 63