How Can I Set Optimal Operating Parameters; What Are Preset Modes; How Can I Restore The Fish Finder Default Operating Parameters - Standard Horizon CP1000C Owner's Manual

· Push the panel towards the case (be sure to have well positioned the rubber gasket).
Close the FF520 box screwing the four screws.
7.1

HOW CAN I SET OPTIMAL OPERATING PARAMETERS.

Optimal operating parameters can be set accordingly with the intended use of the Fish
Finder, anyway to quickly get optimal operational parameters for fishing it is possible to
select the FISH preset from the Fish Finder Setup menu, while for cruising it is possible to
select the CRUISE preset.
7.2

WHAT ARE PRESET MODES?

Preset modes are pre-defined settings of the Fish Finder operating parameters. There are
five preset. You can use them to quickly set the Fish Finder in the most commonly used
operating modes.
These are:
· CRUISE
· FISH
· AUTORANGE : sets the autorange mode and the manual gain mode.
· BOTTOM LOCK: sets the range mode to bottom lock and the manual gain mode.
· MANUAL
7.3 HOW CAN I RESTORE THE FISH FINDER DEFAULT OPERAT-
ING PARAMETERS?
Simply select the CRUISE or the FISH preset. This will restore optimal operating parame-
ters for either cruising or fishing.
Page 38
Figure 7.0b - The FF520 (III)
: sets the Fish Finder in full auto mode with the sensitivity settings
(GAIN OFFSET, NOISE level and STC) optimized for displaying
at best the bottom.
: sets the Fish Finder in full auto mode with the sensitivity setting
optimized for target searching.
: sets the range mode and the gain mode to manual.
FF520