System Information Page; The System Update Menu - Standard Horizon CP1000C Owner's Manual

3.2

SYSTEM INFORMATION PAGE

For troubleshooting you maybe asked by a Standard Horizon Product Support Technician
for the software version of fish finder. The following procedure is how to access this
information.
1. From the Chart Page press [MENU] key to open the Main Menu
2. Move the ShuttlePoint knob to highlight ABOUT... and press [ENTER] or move the
ShuttlePoint knob to the right.
3. A window will be shown with the system information on the Fish Finder Library version
and on the Fish Finder module type and version.
4. Press [CLEAR] to exit.
3.2.0

The System Update menu

The System Update menu allows downloading the Fish Finder firmware into the Fish Finder
device. To select this menu follow the procedure:
1. From the Chart Page press [MENU] key to open the Main Menu.
2. Move the ShuttlePoint knob to highlight ABOUT... and press [ENTER] or move the
ShuttlePoint knob to the right.
3. A window will be shown with the system information.
4. Press [MENU].
5. Move the ShuttlePoint knob to highlight UPDATE BBFF FIRMWARE SOFTWARE and
press [ENTER] or move the ShuttlePoint knob to the right.
6. The current Fish Finder firmware version is shown in the System Update window that
appears on the screen. Insert the C-CARD with the firmware in one of the chart plotter
available slots, and the press [ENTER] to update.
7. Move the ShuttlePoint knob to highlight YES and press [ENTER] to confirm.
8. Press [CLEAR] to exit.
FF520 Page 23