Dynamic Nav-Aids; Safety Status Bar - Standard Horizon CP1000C Addendum

Max functions description
Hide thumbs Also See for CP1000C:
Table of Contents

Advertisement

3.0.3

Dynamic Nav-Aids

This function allows settings blinking lights on Nav-Aids. The blink period and color of each
Nav-aid is read from the Nav-Aid attributes available on the data cartridge. When the ship
is inside the Nav-Aid nominal range, the light of the Nav-Aid will start blinking.
To activate this function follow the procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DYNAMIC NAV-AIDS and press [ENTER] or
move the ShuttlePoint knob to the right.
3. The menu now shows two selections, ON or OFF.
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to move the
Shuttlepoint knob to the left until the chart page is shown.

3.0.4 Safety Status Bar

This feature displays a status bar with six boxes showing the status of certain functions. Any
warning or alarm condition is identified by the red color to indicate possible risk.
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight SAFETY STATUS BAR and press [ENTER]
or move the ShuttlePoint knob to the right.
3. The menu now shows two selections, ON or OFF.
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to press the
ShuttlePoint knob to the left a few times.
Boxes definition is as follows:
Zoom
Normal: when the chart is displayed at normal scale.
U. Zoom: red when the chart is under-zoomed out more than twice normal
scale, gray otherwise.
O. Zoom: red when the chart is over-zoomed in more than twice normal scale,
gray otherwise.
Chart Lock: red when the chart is zoomed in more than twice normal scale,
gray otherwise.
U. Zoom, O. Zoom and chart lock are used with Flexizoom selected.
Best Scale
Red when a more detailed chart is available under the cursor position.
Page 10
Figure 3.0.4 - Safety Status Bar
NOTE
ADDENDUM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp175cCp155c

Table of Contents