Ableton Live With Uf8 - Tutorial; Ssl 360° Setup; Live Setup - Solid State Logic UF8 User Manual

Live Tutorial

Ableton Live with UF8 - Tutorial

The following tutorial guides you through configuring and using the default Live profile on LAYER 1 of UF8. If you wish to configure
Live on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is configured for
the correct SSL V-MIDI ports.
SSL 360° Setup
1. Open the SSL 360° application on your Mac or Windows computer and on the HOME page check that any UF8s you have
connected are present - outline images of each UF8 appear on screen.
2. If you have multiple UF8s connected, click down on the outline image of each unit to check that the UF8s are arranged in the
correct order. If units need to be re-ordered then click and drag to re-arrange.
3. Go to the UF8 page and set Layer 1 to Ableton Live using the drop-down list.
STEP 1 : Open SSL 360° applicaton.
Connected UF8s appear on-screen.

Live Setup

4. Open Live. Go to Preferences > Link MIDI...
5. From the Control Surface drop-down list select MackieControl. Set the Input to SSL V-MIDI Port 1 Source and set Output
to SSL V-MIDI Port 1 Destination.
6. If you have multiple UF8s, use drop-down lists 2-4 to add subsequent MackieControl XTs, incrementing the SSL V-MIDI Port
number for the Input and Output each time - e.g. the second UF8 would be set to SSL V-MIDI Port 2.
STEP 4 : Go the Preferences menu
and click on the Link MIDI tab.
56
STEP 2 : Click and drag to re-order
units if necessary.
STEP 5 : Add a MackieControl and
configure for SSL V-MIDI Port 1 on
Input and Output
STEP 3 : Select the default Ableton
Live DAW profile from the UF8 page.
STEP 6 : If you have multiple UF8s,
add MackieControl XT units and
increment SSL V-MIDI Port number
each time.
SSL UF8 User Guide