Table of Contents
Advertisement
Logic with UF8 - Tutorial
The following tutorial guides you through configuring and using the default Logic profile on LAYER 1 of UF8. If you wish to configure
Logic on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is configured for
the correct SSL V-MIDI ports.
SSL 360° Setup
1.
Open the SSL 360° application on your Mac or Windows computer and on the HOME page check that any UF8s you have
connected are present - outline images of each UF8 appear on screen.
2.
If you have multiple UF8s connected, click down on the image of each unit to check that the UF8s are arranged in the correct
order. If units need to be re-ordered, then click and drag with your mouse to re-arrange.
3.
Go to the UF8 page and set Layer 1 to Logic using the drop-down list.
STEP 1 : Open SSL 360° application.
Connected UF8s appear on-screen.
Logic Setup
4.
Open Logic. Go to Control Surfaces > Preferences... and then go to the Advanced tab. Make sure Control Surfaces is
ticked under Additional Options.
5.
Within the same Preferences menu, go to the Control Surfaces > General tab and ensure that 'Multiple Controls Per
Parameter' is set to '1' and 'Only when all parameters fit one page' is unticked. Also, increase 'Maximum MIDI Bandwidth' to
100%.
6.
Go to the Help Tags tab and ensure that 'Parameter name' and 'Parameter value' are both unticked.
STEP 4 : On the 'Advanced Tab', tick
'Control Surfaces' in the 'Additional
Options' section.
SSL UF8 User Guide
STEP 2 : Click and drag to re-order
units if necessary.
STEP 5 : On the 'Control Surfaces' >
'General' tab ensure that 'Multiple Controls
per Parameter' is set to '1' and 'Only when
all parameters fit on one page' is unticked.
Set 'Maximum MIDI Bandwidth' to 100%.
STEP 3 : Select the default Logic
DAW profile from the UF8 page.
STEP 6 : On the 'Control Surfaces' > Help
Tags' tab, ensure that 'Parameter name'
and 'Parameter value' are both unticked.
Logic Tutorial
33
Advertisement
Table of Contents
