Live Tutorial
Tutorial
This section guides you through using UF8 with Live.
V-Pot
At the top of each strip is the V-Pot (virtual pot). The function of the V-Pot varies, depending on which V-Pot assignment mode is
currently active (Pan, Send etc) but is typically used for tasks such as controlling Pan position, Send levels, Plug-in parameters or
scrolling through parameter options/lists.
Selection Mode
The primary purpose of the NORM and REC keys in the SELECTION MODE section is to determine the behaviour of the SEL keys.
NORM - The SEL keys select a track in Live.
REC - The SEL keys act as record-arm keys.
AUTO - Disabled. This key only applies for Pro Tools profiles.
The secondary labels CLEAR, ALL and ZERO do not apply for Live's UF8 integration.
58
The V-Pot has a push function, which is typically used for defaulting the position of the
parameter being controlled.
100 mm Motorised Fader
Motorised, touch-sensitive faders provide physical control of your Live tracks and are great for
balancing mix levels and writing automation.
Touching a single fader will cause the LowLCD area to display a fader dB
readout, instead of the V-Pot parameter readout.
Solo, Cut & Sel (Select)
Each strip contains SOLO, CUT and SEL keys corresponding to the solo, mute and select
features for each track in Live.
SSL UF8 User Guide