Solid State Logic UF8 User Manual page 84

Table of Contents

Plug-in Mixer Tutorial

V-Pot Assignments

All the parameters of the Channel Strip and Bus Compressor plug-ins that are assignable to the

V-Pots, can be selected using the Soft Keys along the top of UF8.

Use the SOFT KEY bank buttons (V-POT, 1, 2, 3, 4 and 5) to locate the bank that contains the

parameter you want to control on the V-Pots and then press the corresponding soft key to assign

it to the V-Pots.

Remember, if you have Selected parameter follows UC1/Plug-in Mixer, the Channel Strip or

Bus Compressor parameter assigned across the V-Pots will still change automatically in response

The parameters are spread

to the parameter being moved/actioned in the Plug-in Mixer, on UC1 or in the Plug-in itself.

across the SOFT KEY banks

SOFT KEY Bank Assignments - Channel Strip Mode

V-POT Bank

Bank 1

Bank 2

Bank 3

SSL UF8 User Guide

Table of Contents