Solid State Logic UF8 User Manual page 72

Studio One Tutorial
Setting Up Plug-In Control
1. Open up a plug-in you want to configure to be controlled by UF8's V-Pots and click the cog near the top-right.
2. Click the small down arrow near the top-left and make sure 'Recently Touched' is ticked from the drop-down list.
Click the down arrow
3. Click the small down arrow across to the right and select 'Control' from the drop-down list.
Click the down arrow
72
Click the cog
Tick 'Recently Touched'
Select 'Control'
SSL UF8 User Guide