Table of Contents
Advertisement
Channel Mode
Channel Mode allows you to access Sends A-E and the Pan of the selected track, all from one place. This is a unique UF8 control
feature, that utilises the touch-sense encoders to automatically switch send selection.
1.
To enter and exit Channel Mode, press the CHANNEL key.
2.
Select a track that you wish to control the Sends and Pans on using a SEL key.
3.
Use V-Pots 1-5 to control Sends A-E or V-Pot 8 to control Pan.
STEP 1 : Enter Channel Mode
by pressing the CHANNEL key.
Working in Channel Mode
•
Channel Mode turns the SEL keys and LCDs purple to indicate that you're working in Channel Mode.
•
All non-selected tracks are dimmed on the LCDs to make it clear that you're working with Sends & Pan on the selected track.
•
The V-Pot readout bar, together with a bus name label will appear on screen whilst the V-Pot is being touched and revert to
the idle screen state 3-seconds after touch is released.
•
Pre/Post States can also be toggled for each send using the corresponding Soft Key.
•
Simultaneous adjustment of more than one V-Pot and FLIP mode are not possible in Channel Mode.
SSL UF8 User Guide
STEP 2: Use a SEL key to
select a track.
STEP 3: Use V-Pots 1-5 to control Sends A-E and V-Pot 8 to control Pan.
Pro Tools Tutorial
29
Advertisement
Table of Contents
