Mitel 6920 SIP User Manual page 61

Function
Control output on/off
Discreet ring on/off
Do not disturb (busy)
on/off
Do not disturb (forwarding)
on/off
Empty
Free configurable
Free seating: Log in/log
out
Hide number on/off
Hide number per call
Home Alone on/off
Intrusion
Mitel 6920 SIP
eud-1763/2.0 – R6.0 – 06.2018
Description
You can control external electric equipment or instal-
lations using control outputs. For example you can
use your phone to open and close electric gates or to
switch the lights on or off throughout a building.
When this function is on, the phone only rings once.
For further information, please see "Activating dis-
creet ring", page 49.
Your phone does not ring and is set to busy for
incoming calls.
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically for-
warded to a destination that has been configured by
your system administrator.
The key assignment is configured with an empty
function. The key serves as a place-holder. If config-
uration on any key is deleted, the configurations on
the subsequent keys shift their position. This can be
avoided if instead of deleting the configuration, you
configure the Empty
You can use function commands to define a function
to suit your personal requirements. A function can
consist of one or more function commands, function
codes, and the phone number. You can either carry
out a function directly or store it under a key (see
chapter "Overview of available functions", page 58).
Log into/out of a free seating phone (see chapter
"Free seating", page 56).
Permanently prevents your number from being dis-
played to the caller (see chapter "Hide number",
page 41).
Prevents your number from being displayed to the
caller once (see chapter "Hide number", page 41).
If calls to a user group can only be answered by one
user, the user in question can activate Home Alone
on the user group. Then if the user is already in a call,
all subsequent internal or external calls to the user
group obtain a busy tone.
This function allows you to intrude on a call of a busy
user with notification (see chapter "Activate/reply to
intrusion", page 51).
function on that key.
Phoning
61