Regency City CV50E DIRECT VENT Owners & Installation Manual page 17

Table of Contents

Advertisement

Temperature indication Display
With the system in the "OFF" position, press the Thermostat Key and the
Mode Key at the same time. Look at the LCD screen on the transmitter
to verify that a C or F is visible to the right of the room temperature
display (Figures 4 & 5).
Figure 4: Remote Control
display in Fahrenheit.
Turn on the Appliance
With the system OFF, press the ON/OFF
Key on the Transmitter. The Transmitter
display will show some other active
Icons on the screen. At the same time
the IFC will activate the appliance. A
single "beep" from the IFC will confirm
reception of the command.
Turn off the Appliance
With the system ON, press the ON/OFF Key on the Transmitter. The
Transmitter LCD display will only show the room temperature (Fig. 6).
At the same time the IFC will turn off the appliance. A single "beep"
from the IFC confirms reception of the command.
Figure 5: Remote Control
display in Celsius.
Figure 6: Remote Control
display
owner's information
Remote-Flame Control
The Proflame has six (6) flame levels. With the system on, and the flame
level at the maximum in the appliance, pressing the Down Arrow Key
once will reduce the flame height by one step until the flame is turned off.
The Up Arrow Key will increase the flame height each time it is pressed.
If the Up Arrow Key is pressed while the system is on but the flame is
off, the flame will come on in the high position. ( Fig. 7 & 8 ) A single
"beep" will confirm reception of the command.
Fig. 7
Fig. 8
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a room.
To activate this function, press the Thermostat Key (Fig. 1). The LCD
display on the Transmitter will change to show that the room thermostat
is "ON" and the set temperature is now displayed (Fig. 9). To adjust the
set temperature, press the Up or Down Arrow Keys until the desired set
temperature is displayed on the LCD screen of the Transmitter.
Figure 9
Figure 10
City Series CV50E |
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cv50e-ngCv50e-lpCity seriesCv50e

Table of Contents