Table of Contents
Advertisement
INSTALLER GUIDE
8. If the appliance is in premises in the United Kingdom occupied by a tenant, point
out that by law a landlord must have any gas appliance, flue and pipework which is
situated in a tenant's premises checked for safety at least every 12 months.
9. Advise that the fire may give off a slight odour while new. This is quite normal and
it will disappear after a short period of use.
10. Inform the customer that the Serial number for the appliance is located on
the information label located behind the firefront and underneath the burner
module.
11. Hand the literature pack with this guide to the customer.
16. SERVICING & PARTS REPLACEMENT
16. SERVICING AND PARTS REPLACEMENT
Always turn off the gas supply and allow to cool completely before
commencing any servicing (The appliance inlet 'T' connector incorporates an
isolating valve).
It is recommended that, at least once a year, the appliance is disconnected and
the fireplace opening checked and cleared of any debris.
This product uses fuel effect pieces and burner compartment walls containing
Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.
Excessive exposure to these materials may cause irritation to eyes, skin and
respiratory tract. Consequently, it is important to take care when handling these
articles to ensure that the release of dust is kept to a minimum. To ensure that the
release of fibres from these RCF articles is kept to a minimum, during installation
and servicing we recommend that you use a HEPA filtered vacuum to remove any
dust and soot accumulated in and around the fire before and after working on the
fire. When replacing these articles we recommend that the replaced items are not
broken up, but are sealed within a heavy duty polythene bag, clearly labelled as
RCF waste. RCF waste is classed as a stable, non-reactive hazardous waste and
may be disposed at a landfill licenced to accept such waste. Protective clothing is
not required when handling these articles, but we recommend the use of suitable
gloves to prevent irritation. We also recommend you follow the normal hygiene
rules of not smoking, eating or drinking in the work area and always wash your
hands before eating or drinking.
This appliance does not contain any component manufactured from asbestos or
asbestos related products.
Check that the appliance is clean and that soot or debris is not blocking the gaps
-
between the ceramic fuel effect pieces causing an imperfect flame.
Check that soot or debris is not impairing the electrode spark or pilot burner.
-
Check that soot or debris is not blocking any of the slots in the main burner.
-
After servicing, make sure that the ceramic walls are replaced correctly as
-
described in this guide and the ceramic fuel effect pieces are replaced correctly as
described in the installer and owner guide supplied with the ceramic fuel effect. The
ceramic fuel effect guide may have been placed inside or attached to this guide.
Always test for gas soundness and spillage after servicing the appliance.
-
INSTALLER GUIDE
31
Advertisement
Chapters
Table of Contents
