Parker 507 Product Manual page 6

 When replacing a drive in an
application and before returning to use,
it is essential that all user defined
parameters for the product's operation
are correctly installed.
 In a domestic environment this product
may cause radio interference in which
case supplementary mitigation
measures may be required.
This equipment contains electrostatic

discharge (ESD) sensitive parts.
Observe static control precautions when
handling, installing and servicing this
product.
Safety Information
CAUTION!
 The specifications, processes and circuitry described herein are for guidance only
and may need to be adapted to the user's specific application. We can not
guarantee the suitability of the equipment described in this Manual for individual
applications.
Under fault conditions, power loss or unintended operating conditions, the drive may
not operate as intended.
In particular:
 Stored energy might not discharge to
safe levels as quickly as suggested, and
can still be present even though the
drive appears to be switched off
A drive is a component within a drive system that may influence its operation or
effects under a fault condition.
Consideration must be given to:
 Stored energy
EMC
APPLICATION RISK
RISK ASSESSMENT
 Supply disconnects  Sequencing logic  Unintended
 All exposed metalwork in the Inverter
is protected by basic insulation and
bonded to a safety earth.
 RCDs are not recommended for use
with this product but, where their use
is mandatory, only Type B RCDs
should be used.
This is a product of the restricted

sales distribution class according to
IEC 61800-3. It is designated as
"professional equipment" as defined
in
EN61000-3-2. Permission of the
supply authority shall be obtained
before connection to the low voltage
supply.
 The motor's direction of rotation might not
be controlled
 The motor speed might not be controlled
 The motor might be energised
!
operation
Cont-5