Table of Contents
Advertisement
Central Remote Controller
Unit Order Settings
Set the display order of indoor units on the "Unit" screen.
NOTE
Central control address: The indoor units are arranged in ascending order of Central control address, and the numbers display
the Central control address.
Line address: The indoor units are arranged in ascending order of line address, and the numbers display the serial number.
1
On the "Display settings" screen, select "Unit Order
Settings" then press [ ] (Confirm)
The "Unit Order Settings" screen appears.
2
Press [˄] and [˅] to select the display order, then
press [ ] (Confirm)
The display order changes to the selected display order.
• Press [
] (Return) to return to the "Display settings" screen.
Installation Manual
25
-EN
Advertisement
Table of Contents
