Atlas Copco MT Focus 6000 Quick Start Manual

Hide thumbs Also See for MT Focus 6000:

Printed Matter No. 9839 1629 01

Publication Date 2019-03-29

This quick start guide is applicable for the following products:

■

ETD MT

■

QMC

Read all safety warnings and instructions

Failure to follow the safety warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

MicroTorque

WARNING

Electric screwdriver

Quick Guide

Table of Contents

Need help?

Do you have a question about the MT Focus 6000 and is the answer not in the manual?

Page 1 MicroTorque Printed Matter No. 9839 1629 01 Electric screwdriver Publication Date 2019-03-29 Quick Guide This quick start guide is applicable for the following products: ■ ETD MT ■ WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
Page 2 MicroTorque Quick start guide Connect the tool to MT Focus 6000 using a MT tool cable. Connect MT Focus 6000 to power supply. Make sure to switch on the power supply to start the con- troller. WARNING Risk of Injury The tool may rotate when the system is switched on and the tool is initializing.
Page 4 Original instructions Atlas Copco Industrial © Copyright 2019, Atlas Copco Industrial Technique AB. All rights reserved. Any Technique AB unauthorized use or copying of the contents or part thereof is prohibited. This SE-10523 STOCKHOLM applies in particular to trademarks, model denominations, part numbers and drawings.