Table of Contents
Advertisement
3
Description of the machine
This section contains information for understanding the machine.
3.1
General description
General description of the product
The Water management system was designed and built by deconta GmbH, Im Geer 20,
46419 Isselburg.
The deconta Water management system C 400 V provides for the heating of the shower
water and takes over the treatment (filtering) of the contaminated waste water.
The electronic flow heater, the waste water pump and a 3-stage waste water filter system
are accommodated in the powder-coated aluminium housing.
The hot water output temperature of the shower water is infinitely variable with a maximum
flow rate of 10 litres per minute.
3.1.1
Sewage pump
The self-priming wastewater pump is installed ready for operation in the Water management
system. It sucks the contaminated shower water through the pre-filter and then pumps it
through the two fine filters. During showering, an automatic system ensures that the pump
is started and runs during the entire process. Manual starting is possible by pressing the
"waste water pump start" button.
3.1.2
Version with 2 waste water pumps
The Water management system C 400 V can be equipped with a second waste water pump.
This sucks the contaminated shower water through a separate pre-filter in parallel with the
first waste water pump and then pumps it through the two common fine filters. A typical
application is a 5-chamber airlock with two shower chambers.
3.1.3
Version with control compulsory locking
In this version, the control for the forced locking and forced showering of the deconta
personal lock is integrated in the Water management system.
Water management system C 400 V
Original operating instructions
Description of the machine
Sewage pump start
9 from 40
Version 2
Advertisement
Table of Contents
