9
Operation
This section contains information for the safe use of the machine.
9.1
Qualification of the staff
Persons using the machine must meet the following requirements:
Person
Operator
9.2
Warning of residual risks
Water management system C 400 V
Original operating instructions
Required qualification
Instruction, training by the manufacturer
Touching the cores of a damaged mains connection cable.
Touching machine parts that have become live due to faulty
conditions.
Only operate the unit on mains supplies that are protected by
residual current circuit breakers!
Damage due to unsuitable mains voltage.
The unit may be damaged if it is connected to an unsuitable mains
voltage.
Check whether the voltage indicated on the type plate corresponds
to the local mains voltage.
Preset temperature (approx. 37°C). Do not change the settings on
the temperature setting knob of the instantaneous water heater.
Danger of scalding!
Check the outlet temperature before every shower!
Temperature setting knob
Operation
26 from 40
Version 2