Flight Safety; Flight Environment Requirements; Wireless Communications Requirements - dji MATRICE M30 EU User Manual

Flight Safety

Make sure to have training and practice before operating any actual flight. Practice with the simulator
in DJI Assistant 2 or fly under the guidance of experienced professionals. Pick a suitable area to fly in
according to the following flight requirements and restrictions. Fly the aircraft below 120 m (400 ft). Any
flight altitude higher than that may violate local laws and regulations. Make sure you understand and
comply with the local laws and regulations before flying. Read the Disclaimer and Safety Guidelines
carefully to understand all safety precautions before flying.

Flight Environment Requirements

1. DO NOT fly the aircraft in severe weather conditions. These include strong winds exceeding 12 m/s,
rain heavier than 100 mm (3.9 in) in 24 hours, snow, fog, hail, lightning, tornadoes, hurricanes, and
other weather with low visibility.
2. Place the aircraft on open and unobstructed flat ground to take off. Make sure the aircraft is at a safe
distance from any surrounding obstacles, buildings, crowds, or trees. Fly the aircraft within the visual
line of sight (VLOS) to ensure flight safety.
3. If light conditions surrounding the aircraft are poor, the navigation information on DJI Pilot 2 will show
that the vision system or infrared sensing system is not functioning. This means the vision system
and the infrared sensing system may not be working properly and the aircraft is unable to sense
obstacles. Observe the surrounding environment at all times through the live FPV camera view and
maintain control of the aircraft to ensure flight safety.
4. Make sure the beacons and the auxiliary lights are enabled at night for flight safety.
5. DO NOT take off from a moving vehicle.
6. To avoid affecting the motor service life, DO NOT take off or land the aircraft on sandy or dusty areas.
7. Operate the aircraft, battery, remote controller, and charging device in a dry environment.
8. Make sure the temperature and humidity is suitable for the gimbal camera during usage.
9. This product shall not be used in potentially explosive atmospheres.

Wireless Communications Requirements

1. Make sure that the antennas on the front arms and the bottom of the aircraft body are not damaged
or loose.
2. Fly in wide open areas. Tall buildings, steel structures, mountains, rocks, or tall trees may affect the
accuracy of the GNSS and block the video transmission signal.
3. To avoid interference with the remote controller from other wireless equipment, make sure to power
off nearby Wi-Fi and Bluetooth devices when controlling the aircraft remotely.
4. Be extremely alert when flying near areas with magnetic or radio interference. Pay close attention
to the video transmission quality and signal strength on DJI Pilot 2. Sources of electromagnetic
interference include but are not limited to: high voltage lines, large scale power transmission stations
or mobile base stations, and broadcasting towers. The aircraft may behave abnormally or lose control
when flying in areas with too much interference. Return to the Home Point and land the aircraft if
prompted to do so in DJI Pilot 2.
12
©
2022 DJI All Rights Reserved.