Page 2
PSDK port so users can broaden its new FPV camera with night vision. The DJI Pilot 2 app can be applications. used to observe the real-time view from the cameras and take The built-in DJI AirSense system detects nearby aircraft in photos and videos.
Page 3
30. Downward Infrared Sensing DO NOT disassemble the product without the assistance of a DJI authorized dealer (except for components allowed to be disassembled by users in this guide), otherwise it will not be covered under System warranty. 31. Bottom Auxiliary Light 32.
Page 4
The remote controller needs to be activated before using for the High first time. Follow the prompts to activate. Refer to the Matrice 30 Series User Manual for more information about the internal and external batteries. 2. Charging the TB30 Batteries and WB37 Battery Storage Mode: Each battery pair is charged to 50% in sequence and kept at 50% after charging.
4. Preparing the Aircraft Unfolding the Aircraft 1. Unfold the frame arms on both sides in the same way. Make sure the frame arm folding buttons pop out so that the frame arms are locked firmly. 2. Unfold the propellers and rotate the gimbal pitch axis to 0°...
C. Make sure the lenses of the vision systems, cameras, FPV, the glass of the infrared sensors, and the auxiliary I. To ensure flight safety, enter the flight view of DJI Pilot 2 and lights are clean and not blocked in any way.
The default control stick mode is Mode 2. The left control stick controls the altitude and heading of the aircraft while the right control stick controls the forward, backward, and Refer to the Matrice 30 Series User Manual for more information sideward movements. about features and applications.
Need help?
Do you have a question about the MATRICE 30 Series and is the answer not in the manual?
Questions and answers