Page 1
Compatible Firmware Update Guide for M300 RTK and M350 RTK Contents Read Before Using this Guide Firmware Update Guide Warnings for Updating to a Compatible Firmware Version Device Update Sequence Requirements Device Update Method List Aircraft and Remote Controller DJI Payload...
Read Before Using this Guide This guide is intended to explain the compatibility between the aircraft (M300 RTK, M350 RTK) and the DJI payloads, remote controller (DJI Smart Controller Enterprise, DJI RC Plus remote controller), Intelligent Battery Station (BS60, BS65) and Intelligent Flight Batteries (TB60, TB65), and how to update them to a compatible firmware version.
Page 3
Controller DA2 Firmware Update [1] The aircraft of M300 RTK + RC Plus combination must use the DA2 Offline Update for the first time to update, read DA2 Offline Update Steps to perform the firmware update. After the compatible firmware update is completed, the further update of the M300 RTK + RC Plus combination can be updated using App Update All / App Offline Update / DA2 Firmware Update.
Page 4
[1] The TB65 battery can only be used when the firmware of the M300 RTK is v07.00.01.00 or above. Otherwise, there will be flight safety risks. DA2 Offline Update Steps 1. Go to the official DJI website of M300 RTK (https://enterprise.dji.com/matrice-300/ downloads), and download the aircraft offline firmware package of v57.00.01.00.
Page 5
8. After updating, power on the DJI RC Plus remote controller, run DJI Pilot 2, and tap on the homepage to select MATRICE 300 RTK to link the remote controller to M300 RTK. 9. After linking, go to the upper left corner of the DJI Pilot 2 homepage, tap Data and Privacy >...
Need help?
Do you have a question about the M300 RTK and is the answer not in the manual?
Questions and answers