Canyon OTTO CNS-SW86 Quick Manual page 8

ENG
GETTING STARTED
Charging (fig. E). Charge the device before using it for the first time.
To do so, connect the charging cable (6) to the electrical contacts (5)
and connect it to the power supply.
WARNING! The power supply output should not exceed 5.0 V 1.0 A
(power adapter not included).
Turning the device on. Press the device's power button (2) for
3–5 seconds until the dial appears (see fig. C).
Turning the device off. While on the screen with the watch face,
swipe down. Select
("Turn off") and confirm with
Installing and connecting the app (fig. H). To make your watch
and smartphone work together, install the free Canyon Life app.
Scan the QR code (see p. 2) to go to Google Play or App Store,
download and run the app. Log in to your account or register a new
account. Next, activate BT on your smartphone. In the Canyon Life
app, tap "Connect BT Device". Place the watch and smartphone next
to each other and press "Start". Select your watch from the list
(SW86) and tap "Add device".
Change of watch faces (fig. I, J). For more information on choosing
watch faces, see the complete user manual at canyon.eu/drivers-
and-manuals.
Menu navigation. When you are on a screen with a watch face,
swipe down to go to the menu. Data on the level of the device charge
and BT connection are available, and buttons are located in the
menu (see fig. G):
"Theatre" mode. Set the
minimum screen
brightness and disable
vibration
Vibration. Enable or
disable vibration
Brightness. Changing the
brightness level (5 levels)
Settings. List of additional
functions
8
("Settings"). In the menu that appears, press
("Yes") (see fig. F).
Weather. Weather forecast
(requires connection to the
app)
For a full description of the
apps, see the full user
manual at
canyon.eu/drivers-and-
manuals