Page 3
DEVICE DESCRIPTION FIGURE 1 Attention! These watches do not have the Touch Screen technology, so all manipulations are performed using the A, B, C, D buttons or their combinations. Incoming messages notification Selfie function activation Switching on/off indicator Press and hold buttons B and C Incoming calls notification С...
Page 4
Time setting To enable automatic setting of the time, connect your watch to the phone via Canyon Fit. To make manual settings, do as follows: Press button D and hold it till the device switches to the `time setting mode’: the time indicator begins to blink.
Page 5
By default, this are transferred to your watch from the screen displays the atmospheric pressure phone, if the watch is connected to Canyon (Pa); to switch to the altimeter, briefly press Fit. Make sure that the data transfer and button C...
Need help?
Do you have a question about the CNS-SW51BB and is the answer not in the manual?
Questions and answers