Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION INSTRUCTIONS FOR
TRD-26
TRD-30
TRD-33
SAFETY INFORMATION
For your safety, always comply with all
warnings and safety instructions
contained in this manual to prevent
personal injury or property damage.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this appliance.
INSTALLER: LEAVE OWNER'S MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE.
TRD SERIES
(TD-190026-1)
(TD-190030-1)
(TD-190033-1)
WARNING
(TD-190038-1)
TRD-38
TRD-44
(TD-190044-1)
TRD-48
(TD-190048-1)
Version:202308
Advertisement
Table of Contents
Related Manuals for Amantii TD-190038-1
Summary of Contents for Amantii TD-190038-1
- Page 1 INSTALLATION AND OPERATION INSTRUCTIONS FOR TRD SERIES (TD-190038-1) TRD-26 TRD-38 (TD-190026-1) TRD-44 (TD-190044-1) TRD-30 (TD-190030-1) (TD-190033-1) TRD-48 TRD-33 (TD-190048-1) SAFETY INFORMATION WARNING For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii Electric Fireplace. IMPORTANT INSTRUCTIONS ............................ -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use. -
Page 4: Fcc Cautions
FCC CAUTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Unpacking And Testing The Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly. -
Page 6: Trd-26 (Td-190026-1)
TRD - 26 (TD-190026-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need MOTOR HEATER assistance during installation, please Appliance Width... -
Page 7: Trd-30 (Td-190030-1)
TRD - 30 (TD-190030-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need MOTOR HEATER assistance during installation, please Appliance Width... -
Page 8: Trd-33 (Td-190033-1)
TRD - 33 (TD-190033-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need MOTOR HEATER assistance during installation, please Appliance Width... -
Page 9: Trd-38 (Td-190038-1)
TRD - 38 (TD-190038-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need... -
Page 10: Trd-44 (Td-190044-1)
TRD - 44 (TD-190044-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need MOTOR HEATER assistance during installation, please Appliance Width... -
Page 11: Trd-48 (Td-190048-1)
TRD - 48 (TD-190048-1) Description This appliance has been tested in ELECTRIC FIREPLACE accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated Watts 1200W Max electric room appliances in the United NO HEATER States and Canada. If you need MOTOR HEATER assistance during installation, please Appliance Width... -
Page 12: Outdoor Installation
OUTDOOR INSTALLATIONS The TRD series of electric fireplaces are suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance. -
Page 13: Installation
12 3/8 16 7/8 TRD-30 (TD-190030-1) 30 3/8 12 3/8 19 1/4 TRD-33 (TD-190033-1) 32 3/4 12 3/8 22 3/8 TRD-38 (TD-190038-1) 38 1/8 13 3/8 27 3/8 TRD-44 (TD-190044-1) 44 1/4 14 3/4 31 3/4 TRD-48 (TD-190048-1) 48 1/4... - Page 14 2. When the trim is removed, take off the front glass panel. When the trim is removed, take off the front glass panel. 3. Unscrew the screws located on each screws located on each side and take off the inner side steel panels. side and take off the inner side steel panels.
- Page 15 4. Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make Put the trim back onto the appliance and fasten with screws.(NOTE: This step is to make sure that the fireplace fits the wall opening well and there is no gap between the trim and the sure that the fireplace fits the wall opening well and there is no gap between the trim and the sure that the fireplace fits the wall opening well and there is no gap between the trim and the...
- Page 16 6. Remove the trim following STEP 1. Screw back the inner side steel panels. Remove the trim following STEP 1. Screw back the inner side steel panels. Remove the trim following STEP 1. Screw back the inner side steel panels. 7.
-
Page 17: Hardwire Installation
HARDWIRE INSTALLATION Turn off the appliance completely and let cool before servicing. Only a qualified Turn off the appliance completel Turn off the appliance completely and let cool before servicing. Only a qualifi and let cool before servicing. Only a qualified technician should service and repair this electric fireplace. -
Page 18: Media Options
MEDIA OPTIONS The media that come with this appliance are Birch Log Set, “Clear glass”, Amber glass, one (1) bag of Black Vermiculite and one (1) bag of White Vermiculite. BIRCH LOG SET AMBER GLASS CLEAR GLASS VERMICULITE MEDIA INSTALLATION Unscrew 4 screws and take off the trim. -
Page 19: Operation
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION Press to turn on and off the fireplace. -
Page 20: Remote Control Operation
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter. - Page 21 AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with keys. You can switch temperature between Celsius and Fahrenheit with keys.When it is on Auto mode,fireplace operate at 1 00W. Press this button to adjust the speed of the flame.
- Page 22 When the 7 day timer’s set, the icon will be displayed on the LCD screen of the remote control. Press again to cancel the 7 da y timer and the icon will disappears. NOTE: If the 7 day timing and the general timing are set at the same time, the system will respond to an earlier shutdown time.
-
Page 23: Wifi Operation
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION 1. - Page 24 FIG.4 3. Press (flame button) on the touch panel of the fireplace for more than 5 seconds when the fireplace in standby mode. There will be 2 beeps come out from the fireplace and the (flame button) will flash as well indicating that Wi-fi is in EZ mode. Then please confirm to go next.
- Page 25 6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi. FIG.7 NOTE: Turn off the flashing blue Wifi indicator light Touch the (power button) once, the blue light will stop flashing.
-
Page 26: Replacement Parts
REPLACEMENT PARTS There is a QR code where the arrow is marked in below image (The QR code is on the left top behind the front glass). Scan the code to get the replacement parts list for your reference. You will get a detailed parts list with images. *There is a QR code in page 2 of the manual, at the bottom of the table of contents. -
Page 27: Exploded View
EXPLODED VIEW... -
Page 28: Wiring Diagram
WIRING DIAGRAM 2018/07/21 FR-4 SHENGYI LED4-M23 ER1 27 YR1 27 Stepper Motor... -
Page 29: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out. Inspect the LED’s and replace them if necessary. Back black cloth is falling off Change a flicker and back black cloth. and rolled up in the flicker. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and... -
Page 30: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:... -
Page 31: Warranty
Products covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Amantii warrants such products to be free from defects in material and workmanship for a period of five (5) years from the date of the first purchase of such products. - Page 32 The provisions of the United Nations Convention on Contracts for the Sale of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty. GENERAL Amantii reserves the right to make changes at any time without notice, in design, material, specifi cations, prices and the right to discontinue styles and products. GLASS...
- Page 33 Technical Support: 877.850.9458 - Ext 5 Customer Service: 877.850.9458 - Ext 1 Or Email us at: cdn-service@amantii.com...
Need help?
Do you have a question about the TD-190038-1 and is the answer not in the manual?
Questions and answers