12 Introduction to the manual
Categorization by frame size and option code
The frame size identifies information which concerns only a certain frame size of the drive.
The frame size is shown on the type designation label. All frame sizes are listed in the
technical data.
The option code (+A123) identifies information which concerns only a certain optional
selection. The options included in the drive are listed on the type designation label.
Use of component designations
Some device names in the manual include the item designation in brackets, for example
[Q20], to make it possible to identify the components in the circuit diagrams of the drive.
Quick installation flowchart
Task
Plan the electrical installation and acquire the accessor-
ies needed (cables, fuses, etc.).
Check the ratings, required coolant flow, and other
technical data.
Select the brake resistor (if custom resistor is used).
Examine the installation site.
Unpack and examine the drive (only intact units may
be started up).
Make sure that all necessary optional modules and
equipment are present and correct.
Fasten the cabinet and join cabinet sections together.
Route the resistor cables (if customer resistor is used).
Measure the insulation of the resistor circuit (if customer
resistor is used).
Connect the resistor cables and thermal switch (if cus-
tomer resistor is used).
Connect the control cables (if customer resistor is used).
Check the installation.
Start the brake unit up.
See
Guidelines for planning the electrical installa-
tion (page 31)
Technical data (page 89)
Selecting the brake resistor (page 31)
ACS880 liquid-cooled multidrive cabinets mechanical
installation instructions
(3AXD50000048635
ACS880 liquid-cooled multidrive cabinets mechanical
installation instructions
(3AXD50000048635
If the drive has been non-operational for more than one
year, the DC link capacitors need to be reformed. See
Capacitor reforming instructions
[English]).
ACS880 liquid-cooled multidrive cabinets mechanical
installation instructions
(3AXD50000048635
Selecting and routing the brake resistor
cables (page 32)
Measuring the insulation of the brake resistor cir-
cuit (page 38)
Electrical installation (page 35)
Installation checklist (page 57)
Start-up (page 59)
ACS880 brake control program firmware manual
(3AXD50000020967
[English])
[English])
[English])
(3BFE64059629
[English])