Table of Contents
Advertisement
80 Maintenance
Removing the module
￭
1.
Do the steps in section
2.
Assemble the service platform delivered with the drive. Refer to section
the service platform (page
3.
Remove the shrouding in front of the module.
4.
Remove the locking screws of the swing-out frame (if present) and open it.
5.
Disconnect the wiring from the module and move it aside. Use cable ties to keep
the wiring out of the way.
1
3
Electrical safety precautions (page
79).
b
a
35).
2
4
c
Assembling
Advertisement
Table of Contents
