Table of Contents
Advertisement
Memory unit
Replacing the memory unit
￭
After replacing a control unit, you can keep the existing parameter settings by
transferring the memory unit from the defective control unit to the new control unit.
WARNING!
Obey the safety instructions given in
cabinets and modules safety instructions (3AXD50000048633
If you ignore the safety instructions, injury or death, or damage to the
equipment can occur.
If you are not a qualified electrical professional, do not do installation
or maintenance work.
WARNING!
Do not remove or insert the memory unit when the control unit is powered.
1.
Stop the drive and do the steps in section
before you start the work.
2.
Make sure that the control unit is not powered.
3.
Remove the fastening screw and pull the memory unit out.
4.
Install a memory unit in reverse order.
ACS880 liquid-cooled multidrive
Electrical safety precautions (page 35)
Maintenance 89
[English]).
Advertisement
Table of Contents
