Husqvarna FC 450 2020 Owner's Manual page 104

12 BRAKE SYSTEM
102
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
K01106-10
V01357-10
Preparatory work
–
Check the brake linings of the rear brake. (
Main work
(All FC models)
–
Stand the vehicle upright.
–
1
Remove screw cap
ring.
–
Add brake fluid up to the marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten the screw cap with the membrane and
O-ring.
Info
Immediately clean up any brake fluid that has
overflowed or spilled with water.
(FX 450)
–
Stand the vehicle upright.
–
Remove the cable ties.
–
1
Remove screw cap
–
Add brake fluid up to the marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten the screw cap with the membrane and
the shim.
Info
Immediately clean up any brake fluid that has
overflowed or spilled with water.
–
Mount the cable ties.
p. 103)
2
with membrane and the O-
A
.
p. 155)
2
with membrane and the shim.
A
.
p. 155)