Advertisement
Quick Links
Telescoping Quad Monitor Desk Mount
Instruction Manual
SKU: STAND-TS38C-4
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-ts38c-4
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-TS38C-4
Summary of Contents for Vivo STAND-TS38C-4
- Page 1 Telescoping Quad Monitor Desk Mount Instruction Manual SKU: STAND-TS38C-4 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-ts38c-4 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 OPTION A: Clamp Install Mount Upper Clamp (E) to Bottom Pole (A) using M5x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Clamp Soft Pad (K) and attach to Upper Clamp (E). Assemble Lower Clamp (D) to Upper Clamp (E) using M8x12mm Screws (S-B) and 5mm Allen Wrench (T-B) and secure the assembly to the desktop. - Page 4 STEP 2 Thread Middle Pole (B) onto Bottom Pole (A), and Top Pole With Cap (C) onto Middle Pole (B). STEP 3 Slide Pole Cable Clips (I) and Swivel Arms (F) onto the pole assembly. Secure Swivel Arms (F) using 6mm Allen Wrench (T-C).
- Page 5 STEP 4 OPTION A: Flat Back Monitor Attach the VESA Plates (G) to the monitor with Thumbscrews (M-A). NOTE: Hand tighten screws to avoid over tightening. OPTION B: Curved Back Monitor Attach VESA Plate (G) to the monitor with M4x30mm Screws (M-B) and M4 Spacers (M-C). NOTE: Gently tighten using a screwdriver...
- Page 6 STEP 5 Slide VESA Plates (G) onto the Swivel Arm (F). The monitors can be leveled using 3mm Allen Wrench (T-A). Secure using M6 Cap Nuts (S-C). STEP 6 Adjust the length of Swivel Arm (F) using 3mm Allen Wrench (T-A).
- Page 7 STEP 7 Manage cables using Arm Cable Clips (J) and Pole cable Clip (I). STEP 8 Adjust the tilt using 5mm Allen Wrench (T-B).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TS38C-4 and is the answer not in the manual?
Questions and answers